White Papers

Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage
Information
The following describes the show fip-snooping fcf command shown in the following example.
Field Description
FCF MAC MAC address of the FCF.
FCF Interface Slot/port number of the interface to which the FCF is connected.
VLAN VLAN ID number the session uses.
FC-MAP FC-Map value the FCF advertises.
ENode Interface Slot/ number of the interface connected to the ENode.
FKA_ADV_PERIO
D
Time (in milliseconds) during which FIP keep-alive advertisements transmit.
No of ENodes Number of ENodes connected to the FCF.
FC-ID Fibre Channel session ID the FCF assigns.
Example
DellEMC# show fip-snooping fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of Enodes
------- ------------- ---- ------ -------------- -------------
54:7f:ee:37:34:40 Po 22 100 0e:fc:00 4000 2
show fip-snooping statistics
Display statistics on the FIP packets snooped on all interfaces, including VLANs, physical ports, and port channels.
Syntax
show fip-snooping statistics [interface vlan vlan-id | interface interface-
type | interface port-channel port-channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics displays.
port-channel-
number
Enter the port channel number of the FIP packet statistics displays.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
588 FIP Snooping