White Papers

Version Description
E-Series Original command.
Usage
Information
Configure a password with the ip ftp password command.
Related
Commands
● ip ftp password — sets the password for FTP connections.
ip ftp vrf
Configures an FTP client with a VRF that is used to connect to the FTP server.
Syntax
ip ftp [vrf {vrf-name | management}]
To undo the FTP client configuration, use the ip ftp [vrf vrf-name] command.
Parameters
vrf-name Enter the vrf-name to specify the VRF that is used by the FTP client.
management Enter the keyword management to specify that the VRF used by the FTP client is
a management VRF.
Defaults Disabled
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4(0.0) Introduced on the S-Series and Z9000.
Usage
Information
Use this command to make the FTP clients VRF-aware. The VRF name that you specify is used by the
FTP client to reach the FTP server. If no VRF name is specified, then the default VRF is used.
ip telnet server enable
Enable the Telnet server on the switch.
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults Enabled
Command Modes CONFIGURATION
Control and Monitoring 113