White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

591

592

593

594

595

596

597

598

599

600

Table Of Contents

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.

ip dhcp snooping binding

Create a static entry in the DHCP binding table.

Syntax

[no] ip dhcp snooping binding mac address vlan-id vlan-id ip ip-address

interface interface-type lease number

Parameters

mac

address

Enter the keyword mac then the MAC address of the host to which the server is

leasing the IP address.

vlan-id

Enter the keywords vlan-id then the VLAN to which the host belongs. The range

is from 2 to 4094.

ip-address

Enter the keyword ip then the IP address that the server is leasing.

interface

type

Enter the keyword interface then the type of interface to which the host is

connected:

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

slot/port information.

lease

time

Enter the keyword lease then the amount of time the IP address are leased. The

range is from 1 to 4294967295.

Defaults None

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.13(0.0) Enhanced the command to map multiple IP addresses to one MAC address.

Enhanced to support DHCP snooping in a VLT setup.