White Papers

default vlan-id
Set the default VLAN ID.
Syntax
default vlan-id <vlan-id>
To reset the default VLAN ID, use the no default vlan-id command.
Defaults none
Command Modes CONFIGURATION
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
commands
show vlan — Displays VLAN configuration.
feature fc
Enables the Fibre channel communication via the NPG functionality.
Syntax
feature fc
Command Modes CONFIGURATION
Default Enabled
Supported Modes Programmable-Mux (PMUX)
Command
History
Version Description
9.6(0.0) Supported on the FN 2210S Aggregator and M I/O Aggregator.
monitor interface
Monitor counters on a single interface or all interfaces on a stack unit. The screen is refreshed every five seconds and the CLI
prompt disappears.
Syntax
monitor interface [interface]
To disable monitoring and return to the CLI prompt, press the q key.
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
● For the management port, enter the keyword managementethernet
followed by the slot (0) and the port (0).
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
● For a Port Channel interface, enter the keyword port-channel followed by a
number. The range is from 1 to 128.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
Interfaces 529