White Papers

Example
Dell#show int po bri
Codes: L - LACP Port-channel
O - OpenFlow Controller Port-channel
A - Auto Port-channel
I - Internally Lagged
LAG Mode Status Uptime Ports
L 128 L3 down 00:00:00
Dell#
To indicate the LACP fallback, Internally lagged is added to the list. When the LAG auto-
configures itself, the LAG status describes as ‘I’.
Related
Commands
show lacp — displays the LACP matrix.
show io-aggregator auto-lag status
Displays global information on the auto-lag status.
Syntax
show io-aggregator auto-lag status
Command Modes EXEC
Supported Modes
Standalone, Stacking, VLT
Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6(0.0) Supported on the FN I/O Aggregator.
9.6(0.0) Supported on the M I/O Aggregator.
Example
Dell-ct-mxl-1-b1(conf)#do show io-aggregator auto-lag status
Auto LAG creation on server port(s) is disabled
show lacp
Displays the LACP matrix.
Syntax
show lacp port-channel-number [sys-id | counters]
Parameters
port-channel-
number
Enter a port-channel number:
The range is from 1 to 128.
sys-id (OPTIONAL) Enter the keywords sys-id and the value that identifies a system.
counters (OPTIONAL) Enter the keyword counters to display the LACP counters.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Link Aggregation Control Protocol (LACP) 729