CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1011

Table Of Contents

peer-address

Enter the peer address of the MSDP peer in a dotted decimal format (A.B.C.D.).

access-list name

Enter the name of an extended ACL that contains permitted SAs. If you do not use

this option, all local entries are blocked.

Defaults Not configured.

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the E-Series.

ip msdp sa-limit

Configure the upper limit of source-active (SA) entries in SA-cache.

Syntax

ip msdp sa-limit number

To return to the default, use the no ip msdp sa-limit number command.

Parameters

number

Enter the maximum number of SA entries in SA-cache. The range is from 1 to

500000.

Defaults 50000