CLI Guide

Version Description
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the C-Series and S-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
Use this command to specify the name of the output QoS policy. Once output policy is specified, rate-
shape, scheduler strict, bandwidth-percentage, and WRED can be defined. This command enables the
qos-policy-output configuration mode—(conf-qos-policy-out).
Related
Commands
● bandwidth-percentage — assigns percentage of bandwidth to the class/queue.
● wred — assigns yellow or green drop precedence.
queue egress
Assign a WRED Curve to all eight egress Multicast queues or designate the percentage for the Multicast bandwidth queue.
Syntax
queue egress multicast linecard {slot number port-set number | all} [wred-
profile name | multicast-bandwidth percentage]
To return to the default, use the no queue egress multicast linecard {slot number
port-set number | all} [wred-profile name | multicast-bandwidth percentage]
command.
Parameters
linecard number Enter the keyword linecard then the line card slot number.
port-set number Enter the keywords port-set then the line card’s port pipe. The range is from 0
or 1.
all Enter the keyword all to apply to all line cards.
wred-profile
name
(OPTIONAL) Enter the keywords wred-profile then your WRED profile name
in character format (16 character maximum). Or use one of the pre-defined WRED
profile names.
Pre-defined Profiles: wred_drop, wred-ge_y, wred_ge_g, wred_teng_y,
wred_teng_g.
multicast-
bandwidth
percentage
(OPTIONAL) Enter the keywords multicast-bandwidth then the bandwidth
percentage. The range is from 0 to 100%.
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.8.10 Introduced on the S4810.
7.5.1.0 Added support for multicast-bandwidth.
7.4.1.0 and
6.5.3.0
Introduced on the E-Series.
Usage
Information
This command does not uniquely identify a queue, but rather identifies only a set of queues. The WRED
curve is applied to all eight egress Multicast queues.
1278 Quality of Service (QoS)