CLI Guide

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY
Process
0x00000000 45040 4504 10000 13.12% 13.20% 12.94% 0
system
0x000001ac 25750 2575 10000 2.78% 2.48% 3.40% 0
sysdlp
0x0000019a 10650 1065 10000 0.60% 1.16% 2.50% 0
sysd
0x000003a5 860 86 10000 0.40% 0.22% 0.28% 0
clish
0x000001ad 520 52 10000 0.20% 0.30% 0.16% 0
lacp
0x000004ba 330 33 10000 0.20% 0.36% 0.09% 0
clish
0x000000c9 1240 124 10000 0.20% 0.15% 0.44% 0
nvmgr
0x000000e0 530 53 10000 0.20% 0.12% 0.16% 0
igmp
0x00000132 420 42 10000 0.20% 0.10% 0.13% 0
vrrp
0x0000028d 410 41 10000 0.20% 0.05% 0.12% 0
ovsdbsvr
0x000000a9 200 20 10000 0.20% 0.03% 0.06% 0
arpm
0x00000253 100 10 10000 0.20% 0.02% 0.02% 0
otm
0x00000206 140 14 10000 0.20% 0.02% 0.03% 0
tnlmgr
0x00000012 1290 129 10000 0.00% 0.10% 0.12% 0
mount_mfs
0x0000024d 40 40 10000 0.00% 0.08% 0.14% 0
xstp
DellEMC#
Related
Commands
● show hardware layer2 acl — displays Layer 2 ACL data for the selected stack member and stack
member port-pipe.
● show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
● show hardware stack-unit — displays the data plane or management plane input and output statistics
of the designated component of the designated stack member.
● show hardware system-flow — displays Layer 3 ACL or QoS data for the selected stack member and
stack member port-pipe.
● show interfaces stack-unit — displays information on all interfaces on a specific S-Series stack
member.
● show processes memory (S-Series) — displays CPU usage information based on processes running in
an S-Series.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control processor’s SWPQ
statistics.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
Control and Monitoring 143