CLI Guide

IPV6(IPV4QOS)
Triple Wide Regions: VmanQos, Openflow, ipv4udfmirracl
L2Acl : 2
Ipv4Acl : 4
Ipv6Acl* : 2
Ipv4Qos* : 0
L2Qos : 2
L2PT : 0
IpMacAcl : 1
VmanQos : 0
EcfmAcl : 0
EtsAcl : 0
FcoeAcl : 0
iscsiOptAcl : 0
ipv4pbr : 0
vrfv4Acl : 0
Openflow : 0
fedgovacl : 0
nlbclusteracl : 0
ipv4udfmirracl: 0
ipv4mirracl : 0
* - shared regions
show cam-usage
Display the amount of memory space used and available in each CAM partition (including Layer 2 ACL, Layer 3 ACL, and
IPv4Flow)
Syntax
show cam-usage [acl | router | switch]
Parameters
acl (OPTIONAL) Enter the keyword acl to display Layer 2 and Layer 3 ACL CAM
usage.
router (OPTIONAL) Enter the keyword router to display Layer 3 CAM usage.
switch (OPTIONAL) Enter the keyword switch to display Layer 2 CAM usage.
Defaults none
Command Modes EXEC Privilege
Command
History
Version Description
9.14(0.0) Updated to display IPv6 flow-based mirroring information on the S5048F-ON,
S6100–ON, Z9100–ON, S6000, and S6000–ON. Updated to display the shared
region between IPv4 QoS and IPv6 ACL entries on the S5048F–ON, S6100–ON,
and Z9100–ON.
9.12(1.0) Introduced on the S5048F–ON.
9.11(2.0P1) Optimized the ACL filters to support more than 200 egress ACL rules on the
S6000, S6000–ON, S6100–ON, Z9100–ON.
9.11.0.0 The show cam-usage command is updated to display ECMP count information.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z9000.
Usage
Information
The following table describes the output fields of the show cam-usage command.
472 Content Addressable Memory (CAM)