Connectivity Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Example
DellEMC# show lldp statistics
--------- LLDP GLOBAL STATISTICS ON CHASSIS ----
Total number of neighbors: 3
Last table change time: 00:01:23, In ticks: 8388
Total number of Table Inserts: 3
Total number of Table Deletes: 0
Total number of Table Drops: 0
Total number of Table Age Outs: 0
Total number of suppressed Traps: 2
DellEMC#
snmp-notification-interval
Used to configure the value for the lldp notification interval, to throttle lldp notification messages.
Syntax
[no] snmp-notification-interval [seconds]
To disable this feature, use the no snmp-notification-interval command.
Parameters
seconds Enter a value from 5 to 3600 seconds.
Defaults 5 seconds
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(2.5) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S6010–ON and Z9100–ON
Usage
Information
SNMP notification for the changes in the lldp remote entry table is throttled by 5 seconds (default), or
the configured time set using this command. If more than one notification message is generated within
the configured time, only the first one will be sent and the remaining messages are suppressed.
LLDP-MED Commands
The following are the LLDP-MED (Media Endpoint Discovery) commands.
Dell EMC Networking OS LLDP-MED commands are an extension of the set of LLDP TLV advertisement commands.
As defined by ANSI/TIA-1057, LLDP-MED provides organizationally specific TLVs (Type Length Value), so that endpoint devices
and network connectivity devices can advertise their characteristics and configuration information. The Organizational Unique
Identifier (OUI) for the Telecommunications Industry Association (TIA) is 00-12-BB.
● LLDP-MED Endpoint Device — any device that is on an IEEE 802 LAN network edge, can communicate using IP, and uses
the LLDP-MED framework.
● LLDP-MED Network Connectivity Device — any device that provides access to an IEEE 802 LAN to an LLDP-MED endpoint
device, and supports IEEE 802.1AB (LLDP) and TIA-1057 (LLDP-MED). The Dell EMC Networking system is an LLDP-MED
network connectivity device.
Link Layer Discovery Protocol (LLDP)
895