Deployment Guide

● 0 – Displays syslog messages format as described in RFC 3164, The BSD syslog Protocol
● 1 – Displays SYSLOG message format as described in RFC 5424, The Syslog Protocol
Example
DellEMC(conf)#logging version ?
<0-1> Select syslog version (default = 0)
DellEMC(conf)#logging version 1
show logging auditlog
Displays an audit log.
Syntax
show logging auditlog
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Example
DellEMC(conf)# show logging auditlog
Related
Commands
● clear logging auditlog — clear the audit log.
show logging
Display the logging settings and system messages logged to the internal buffer of the switch.
Syntax
show logging [number | history [reverse][number] | reverse [number] |
summary]
Parameters
number (OPTIONAL) Enter the number of messages displayed in the output. The range is
from 1 to 65535.
history (OPTIONAL) Enter the keyword history to view only information in the Syslog
history table.
reverse (OPTIONAL) Enter the keyword reverse to view the Syslog messages in FIFO
(first in, first out) order.
Simple Network Management Protocol (SNMP) and Syslog 1503