Deployment Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

771

772

773

774

775

776

777

778

779

780

Table Of Contents

Version Description

9.11(0.0) Updated the command output to include the unicast reverse path forwarding

(uRPF) status.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.5.1.0 Added support for 4-port 40G line cards on the E-Series.

8.3.7.0 Introduced on the S4810.

8.1.1.2 Supported on the E-Series E600i.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

Example

DellEMC# show ip interface tengigabitethernet 1/1/1

TenGigabitEthernet 1/1/1 is down, line protocol is down

Internet address is not set

IP MTU is 1500 bytes

Directed broadcast forwarding is disabled

Proxy ARP is enabled

Split Horizon is enabled

Poison Reverse is disabled

ICMP redirects are not sent

ICMP unreachables are not sent

IP unicast RPF check is not supported

DellEMC#

DellEMC# show ip interface port-channel 128

Port-channel 128 is down, line protocol is down

Internet address is 10.1.1.1/16

Broadcast address is 10.1.255.255

Address determined by user input