Developers Guide

vrrp [ipv6 {vr-id}
| vr-id]
(OPTIONAL) Enter the keyword vrrp to clear the counters of all VRRP groups. To
clear the counters of VRRP groups on all IPv6 interfaces, enter ipv6. To clear the
counters of a specified group, enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear unknown source
address (SA) drop counters when MAC learning limit is configured on the interface.
vlan vlan-id Enter the keyword vlan followed by the interface VLAN number. The range is
from 1 to 4094.
Defaults Without an interface specified, the command clears all interface counters.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Added support to clear the interface configurations corresponding to a range of
ports.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Added the VLAN parameter.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.4.1.0 Added support (E-Series only) for VRRP groups in a VRF instance.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added support for 4093 VLANs on the E-Series. Prior to the release, 2094 was
supported.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Updated the definition of the learning-limit option for clarity.
Example
DellEMC# clear counters
Clear counters on all interfaces [confirm]
DellEMC#
Related
Commands
● mac learning-limit — allow aging of MACs even though a learning-limit is configured or disallow station
move on learned MACs.
Interfaces 647