Glossary

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
8.3.19.0 Deprecated command for S4820T. Replaced by the enable optic-info-
update interval command to update information on temperature and power
monitoring in the SNMP MIB.
8.3.11.4 Deprecated command for Z9000. Replaced by the enable optic-info-
update interval command to update information on temperature and power
monitoring in the SNMP MIB.
8.3.10.0 Deprecated command for the S4810 only. Replaced by the enable optic-
info-update interval command to update information on temperature and
power monitoring in the SNMP MIB.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
The chassis MIB contains the entry chSysXfpRecvPower in the chSysPortTable table. Periodically,
IFA polls the XFP power for each of the ports and sends the values to IFM where it is cached.
To enable polling and to configure the polling frequency, use this command.
end
Return to EXEC Privilege mode from other command modes (for example, CONFIGURATION or ROUTER OSPF modes).
Syntax
end
Command Modes
● CONFIGURATION
● SPANNING TREE
● MULTIPLE SPANNING TREE
● LINE
● INTERFACE
● TRACE-LIST
● VRRP
● ACCESS-LIST
● PREFIX-LIST
● AS-PATH ACL
● COMMUNITY-LIST
● ROUTER OSPF
● ROUTER RIP
● ROUTER ISIS
● ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
100 Control and Monitoring