Glossary

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the E-Series.
Usage
Information
Dell EMC Networking OS counts the SA messages originated by itself and those messages received from
the MSDP peers. When the total SA messages reach this limit, the subsequent SA messages are dropped
(even if they pass RPF checking and policy checking).
If the total number of SA messages is already larger than the limit when this command is applied, those
SA messages that are already in Dell EMC Networking OS continue to be accepted. To enforce the limit in
such situation, use the clear ip msdp sa-cache command.
Related
Commands
● ip msdp peer — configure the MSDP peer.
● clear ip msdp peer — clear the MSDP peer.
● show ip msdp — display the MSDP information.
ip msdp shutdown
Administratively shut down a configured MSDP peer.
Syntax
ip msdp shutdown {peer address}
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.).
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
1030 Multicast Source Discovery Protocol (MSDP)