Glossary

ManualsBrandsDell ManualsAccess PlatformsOS9

1081

To reset the hop count limit, use the no hop-limit {maximum | minimum limit} command.

Parameters

maximum

limit

Enter the keyword maximum then the hop limit value. The range is from 0 to 254.

minimum

limit

Enter the keyword minimum then the hop limit value. The range is from 0 to 254.

Defaults None

Command Modes POLICY LIST CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the C9010.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.9(0.0) Introduced on the Z9500.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000

switches.

Commands

● ipv6 nd ra-guard enable — configure the RA guard related commands.

● ipv6 nd raguard policy policy-name — define the RA guard policy name and enter the RA guard policy

configuration mode.

ipv6 nd ra–guard attach–policy

Apply the IPv6 RA guard to a specific interface.

Syntax

ipv6 nd ra-guard attach—policy policy-name [vlan [vlan 1, vlan 2, vlan

3.....]]

Parameters

policy

policy-

name

Enter the keyword policy then the policy name. The policy-name allows a

maximum of 140 characters.

vlan

[vlan 1, vlan

2, vlan 3........]

Enter the keyword vlan then the VLAN range. The VLAN range is from 1 to 4094.