Glossary

Usage
Information
To redistribute the default route (x:x:x:x::x), use the default-information originate command.
router-id
Designate a fixed router ID.
Syntax
router-id ip-address
To return to the previous router ID, use the no router-id ip-address command.
Parameters
ip-address
Enter the router ID in the dotted decimal format.
Defaults The router ID is selected automatically from the set of IPv4 addresses configured on a router.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
You can configure an arbitrary value in the IP address for each router. However, each router ID must be
unique.
If this command is used on an OSPFv3 process that is already active (has neighbors), all the neighbor
adjacencies are brought down immediately and new sessions are initiated with the new router ID.
show crypto ipsec policy
Display the configuration of IPsec authentication and encryption policies.
Syntax
show crypto ipsec policy [name name]
Parameters
name name (OPTIONAL) Displays configuration details about a specified policy.
Defaults No default behavior or values.
1212 Open Shortest Path First (OSPFv2 and OSPFv3)