Glossary

Virtual Router Redundancy Protocol (VRRP)
Virtual router redundancy protocol (VRRP) is supported by the Dell EMC Networking OS.
Topics:
• IPv4 VRRP Commands
• IPv6 VRRP Commands
IPv4 VRRP Commands
The following are IPv4 VRRP commands.
advertise-interval
Set the time interval between VRRP advertisements.
Syntax
advertise-interval {seconds | centisecs centisecs }
To return to the default settings, use the no advertise-interval command.
Parameters
seconds Enter the number of seconds. The range is from 1 to 255. The default is 1 second.
centisecs
centisecs
Enter the keyword centisecs then the number of centisecs in multiples of 25
centisecs. The range is 25 to 4075 centisecs in multiples of 25 centisecs.
Defaults 1 second or 100 centisecs.
Command Modes INTERFACE-VRRP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Added support for centisecs on the Z9000, S6000, S4820T, S4810, and MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
68
1766 Virtual Router Redundancy Protocol (VRRP)