Glossary

ManualsBrandsDell ManualsAccess PlatformsOS9

851

852

853

854

855

856

857

858

859

860

clear ipv6 route

Clear (refresh) all or a specific route from the IPv6 routing table.

Syntax

clear ipv6 route [vrf vrf-name] {* | ipv6-address prefix-length}

Parameters

vrf

vrf-name

(Optional) Enter the keyword vrf followed by the name of the VRF to clear the

IPv6 routes corresponding to that VRF.

* Enter the * to clear (refresh) all routes from the IPv6 routing table.

ipv6-address

prefix-length

Enter the IPv6 address in the x:x:x:x::x format then the prefix length in the /x

format. The range is from /0 to /128.

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Added support for VRF.

9.2(1.0) Introduced on the Z9500.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the E-Series.

7.8.1.0 Introduced on the C-Series and S-Series.

7.4.1.0 Introduced on the E-Series.

clear ipv6 mld_host

Clear the IPv6 MLD host counters and reset the elapsed time.