Glossary

distribute-list redistributed-override
Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the network.
Syntax
distribute-list redistributed-override in
To return to the default, use the no distribute-list redistributed-override in command.
Defaults none
Command Modes
● ROUTER ISIS (for IPv4)
● CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.8.1.0 Added IPv6 ISIS support.
6.3.1.0 Introduced.
Usage
Information
When you execute this command, IS-IS does not download the route to the routing table if the same
route was redistributed into IS-IS routing protocol on the same router.
domain-password
Set the authentication password for a routing domain.
Syntax
domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the password using MD5.
encryption-type (OPTIONAL) Enter 7 to encrypt the password using DES.
password Enter an alphanumeric string up to 16 characters long. If you do not specify an
encryption type or hmac-md5 keywords, the password is processed as plain
text which provides limited security.
Defaults No default password.
Command Modes ROUTER ISIS
Intermediate System to Intermediate System (IS-IS) 899