Service Manual

Parameters
vlan-list Enter the list of secondary VLANs to associate with the selected primary VLAN.
The list can be in comma-delimited or hyphenated-range format, following the
convention for the range input.
Defaults none
Command Modes INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage
Information
The list of secondary VLANs can be:
● Specified in comma-delimited or hyphenated-range format.
● Specified with this command even before they have been created.
● Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
● private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
● switchport mode private-vlan — sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode private-vlan
command.
Parameters
host Enter the keyword host to configure the selected port or port channel as an
isolated interface in a PVLAN.
promiscuous Enter the keyword promiscuous to configure the selected port or port channel
as an promiscuous interface.
trunk Enter the keyword trunk to configure the selected port or port channel as a trunk
port in a PVLAN.
1208 Private VLAN (PVLAN)