Service Manual

NVRAM erase
Erase all NVRAM contents alone.
Syntax nvram erase
Parameters
mac-address
Enter a MAC address in standard format.
Command Modes BOOT_ADMIN
Command
History
Version Description
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Usage
Information
Use this command to assign a MAC address if FTOS cannot find a default MAC address.
Example
BOOT_USER # BOOT_ADMIN # nvram erase
Are you sure (y/n)? : yes
Erasing NVRAM sectors....Erasing NvRam of size 1024 KB ... DONE
reload
Exit from this mode and reload Dell EMC Networking OS.
Syntax
reload
Command Modes BOOT_USER
Command
History
Version Description
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
serial console
Use the serial console to set the serial console baud rate.
Syntax
serial console <int> <int>
Parameters
serial console
[unit] [baud]
Enter the keyword to set the serial port baud rate. The supported values for serial
console:
● Unit - 0
● Baud rate -9600,115200
No defaults.
Command Modes BOOT_USER
Boot Command Line Interface 331