Setup Guide

● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a port channel interface, enter the keywords port-channel then a
number.
● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
vrf vrf-name Enter the keyword vrf to view debugging information on OSPF corresponding to
that VRF.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11.0.0 Introduced the command.
Usage
Information
The following section describes the command fields.
Lines
Beginning
With or
Including
Description
OSPFv3... Debugging is on for all OSPFv3 packets and all interfaces.
05:21:01 Displays the time stamp.
Sending Ver:3 Sending OSPF3 version..
Example
default-information originate
Configure the Dell EMC Networking OS to generate a default external route into an OSPFv3 routing domain.
Syntax
default-information originate [always] [metric metric-value] [metric-type
type-value] [route-map map-name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that default route information
must always be advertised.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number to configure a metric
value for the route. The range is from 1 to 16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then an OSPFv3 link state type
of 1 or 2 for default routes. The values are:
● 1 = Type 1 external route
● 2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established
route map.
Defaults Disabled.
Command Modes ROUTER OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
1040 Open Shortest Path First (OSPFv2 and OSPFv3)