Setup Guide

wred-profile
Create a WRED profile and name the profile.
Syntax
wred-profile wred-profile-name
To remove an existing WRED profile, use the no wred-profile command.
Parameters
wred-profile-
name
Enter your WRED profile name in character format (32 character maximum). Or
use one of the pre-defined WRED profile names. You can configure up to 26 WRED
profiles plus the five pre-defined profiles, for a total of 31 WRED profiles.
Pre-defined Profiles: wred_drop, wred-ge_y, wred_ge_g, wred_teng_y,
wred_teng_g.
Defaults The five pre-defined WRED profiles. When you configure a new profile, the minimum and maximum
threshold defaults to predefined wred_ge_g values.
If green profile is applied, default yellow also take effect and vice-versa.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Usage
Information
Use the default pre-defined profiles or configure your own profile. You cannot delete the pre-defined
profiles or their default values. This command enables WRED configuration mode —(conf-wred).
Related
Commands
● threshold — specifies the minimum and maximum threshold values of the WRED profile.
rate shape
Define the rate-shaping method to be either as a measure of bytes or packets for each of the hierarchical QoS (HQoS) nodes at
the leaf level to be applied to each queue.
Syntax
[no] rate-shape [kbps | pps] peak-rate [burst-KB/Packets] [committed [kbps
| pps] committed-rate [burst-KB/Packets]]
1190 Quality of Service (QoS)