Users Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1101

txPkt(COS7 ) :0

txPkt(COS8 ) :0

txPkt(COS9 ) :0

txPkt(COS10) :0

txPkt(COS11) :0

txPkt(UNIT0) :0

Example of Viewing Party Bus Statistics

DellEMC#sh hardware stack-unit 1 cpu party-bus statistics

Input Statistics:

27550 packets, 2559298 bytes

0 dropped, 0 errors

Output Statistics:

1649566 packets, 1935316203 bytes

0 errors

Display Stack Member Counters

You can use the show hardware command to display internal receive and transmit statistics, based on the selected command

option.

The following example is a sample of the output for the counters option.

Example of Displaying Counter Values for all Interface in the Selected Stack-Member and Port-Pipe

DellEMC#show hardware stack-unit 1 unit 0 counters

unit: 0 port: 1 (interface Hu 1/30)

Description Value

RX - IPV4 L3 Unicast Frame Counter 0

RX - IPV4 L3 Routed Multicast Packets 0

RX - IPV6 L3 Unicast Frame Counter 0

RX - IPV6 L3 Routed Multicast Packets 0

RX - Unicast Packet Counter 0

RX - 64 Byte Frame Counter 0

RX - 65 to 127 Byte Frame Counter 0

RX - 128 to 255 Byte Frame Counter 0

RX - 256 to 511 Byte Frame Counter 0

RX - 512 to 1023 Byte Frame Counter 0

RX - 1024 to 1518 Byte Frame Counter 0

RX - 1519 to 1522 Byte Good VLAN Frame Counter 0

RX - 1519 to 2047 Byte Frame Counter 0

RX - 2048 to 4095 Byte Frame Counter 0

RX - 4096 to 9216 Byte Frame Counter 0

Example of Displaying Counter Information for a Specific Interface

DellEMC#show hardware counters interface hundredGigE 1/1

unit: 0 port: 50 (interface Hu 1/1)