Users Guide

Table 88. RADIUS Accounting Stop Record Attributes for CLI user (continued)
RADIUS Attribute code RADIUS Attribute Description
46 Acct-Session Time Time the user has received the service.
49 Acct-Terminate-Cause Reason for session termination.
61 NAS-Port-Type
ASYNC - for Console session.
VIRTUAL - for telnet/SSH session.
Table 89. Use cases for CLI user to trigger RADIUS Accounting Start/Stop records
CLI event Accounting type Attributes
CLI user authentication success Start Start record attributes for CLI user.
CLI user log-off Stop Stop record attributes with termination cause as
User Request (1).
CLI user session idle timeout Stop Stop record attributes with termination cause as Idle
Timeout (4).
CLI user session disconnects due
to Dynamic authorization
Stop Stop record attributes with termination cause as
Admin Reset (6).
Table 90. RADIUS Accounting Start Record Attributes for dot1x supplicant
RADIUS Attribute code RADIUS Attribute Description
NAS Identification Attributes
4 NAS-IP-Address IPv4 address of the NAS.
95 NAS-IPv6–Address IPv6 address of the NAS.
Session Identification Attributes
1 User-Name User name/ Supplicant MAC Address (for MAB).
5 NAS-Port Port on which session is terminated.
6 Service-Type Framed (2) for EAP /Call check (10) for MAB.
8 Framed-IP-Address IPv4 address of supplicant.
168 Framed-IPV6-Address IPv6 address of supplicant.
30 Called-Station-Id Switch MAC Address.
31 Calling-Station-Id Supplicant MAC Address.
Accounting Attributes
40 Acct-Status-Type START
44 Acct-Session-Id <Supplicant MAC> | Running number
50 Acct-Multi-Session-Id <Supplicant MAC>|<Switch MAC>|<Timestamp>
51 Acct-Link-Count 1
61 NAS-Port-Type Ethernet
NOTE: Framed IP address attribute is available only when the attribute support is enabled in CLI and when the IP entry is
present in the DHCP binding table.
Table 91. RADIUS Accounting Stop Record Attributes for dot1x supplicant
RADIUS Attribute code RADIUS Attribute Description
NAS Identification Attributes
762 Security