White Papers

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-
Mux (PMUX) mode only.
show vlt private-vlan
Display the private VLAN (PVLAN) associated with the VLT LAG for VLT peer nodes.
Syntax
show vlt private-vlan
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S6000.
9.3(0.0) Introduced on the Z9000, S4810, and S4820T.
Usage
Information
If you add an ICL or VLTi link as a member of a primary VLAN, the ICL becomes a part of the
primary VLAN and its associated secondary VLANs, similar to the behavior for normal trunk ports. VLAN
symmetry is not validated if you associate an ICL to a PVLAN.
Similarly, if you dissociate an ICL from a PVLAN, although the PVLAN symmetry exists, ICL is removed
from that PVLAN. The ICL Status field displays the type of VLAN port of the VLTi link configured in a
PVLAN.
Example
DellEMC#show vlt private-vlan vlan-id
Codes: C- Community, I – Isolated, V – Internally tagged, T – tagged, *
- VLT Pvlan
Primary Secondary ICL Status
10 V (*)
20(C) V
30 (I) V
40 T
50(C) T
60 (I) T
Virtual Link Trunking (VLT) 1731