White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

Table Of Contents

Version Description

8.3.7.0 Introduced on the S4810.

7.7.1.0 Added support for TFTP and SCP.

7.6.1.0 Introduced on the S-Series.

Usage

Information

RFC 3986 specifies that IPv6 host addresses in a uniform resource identifier (URI) must be enclosed in

square brackets, [X:X:X:X::X]. For maximum flexibility this command accepts IPv6 host addresses with or

without the square brackets.

Reload Dell EMC Networking OS after executing this command. To copy Dell EMC Networking OS from

the management unit to one or more stack members, use the upgrade system stack-unit (S-

Series stack member) command.

Example

DellEMC# upgrade system ?

ftp: Copy from remote file system (ftp://userid:password@hostip/

filepath)

scp: Copy from remote file system (scp://userid:password@hostip/

filepath)

tftp: Copy from remote file system (tftp://hostip/filepath)

DellEMC# upgrade system ftp://username:password@10.11.1.1/FTOS-

SB-7.7.1.0.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!........................................................

...........................................................

....................................!

12946259 bytes successfully copied

DellEMC# reload

DellEMC#

upgrade system

Upgrade the Dell EMC Networking OS image. To upgrade the boot flash or boot selector image, use the upgrade boot

command.

Syntax

upgrade system {flash: | ftp: | nfsmount: | scp: | stack-unit {stack-unit-

id | all} | tftp: | usbflash:} file-url {A: |B:}

Parameters

system Enter the keyword system to upgrade the operating system (OS) image.

flash:

file-url

Enter the keyword flash: and specify the location of the image file in the

format //directory-path or press Enter to launch a prompt sequence.

ftp:

file-url

Enter the keyword ftp: and specify the location of the image file in the format //

userid:password@host-ip/filepath or press Enter to launch a prompt

sequence.

nfsmount://

<mount-point>/

filepath

Enter the keyword nfsmount: and specify the location of the image file in the

format //<mount-point>/filepath.

scp:

file-url

Enter the keyword scp: and specify the location of the image file in the format

userid:password@host-ip/filepath or press Enter to launch a prompt

sequence.

82 File Management