White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

1591

Table Of Contents

Version Description

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.3.1.0 Introduced on the C-Series and S-Series.

Usage

Information

Enable DEI before using this command.

member

Assign a stackable VLAN access or trunk port to a VLAN. The VLAN must contain the vlan-stack compatible command in

its configuration.

Syntax

member interface

To remove an interface from a Stackable VLAN, use the no member interface command.

Parameters

interface

Enter the following keywords and the interface information:

● For a Port Channel interface, enter the keywords port-channel, and then a

number.

● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then

the slot/port information.

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

Defaults Not configured.

Command Modes CONF-IF-VLAN

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.