White Papers

max-suppress-
time
(OPTIONAL) Enter the maximum number of minutes a route can be suppressed.
The default is four times the half-life value. The range is from 1 to 255. The default
is 60 minutes.
route-map map-
name
(OPTIONAL) Enter the keyword route-map then the name of a configured route
map.
Only match commands in the configured route map are supported.
Defaults Disabled.
Command Modes
● ROUTER BGP
● ROUTER BGP-address-family
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
If you enter the bgp dampening command, the default values for half-life, reuse, suppress,
and max-suppress-time are applied. The parameters are position-dependent; therefore, if you
configure one parameter, configure the parameters in the order they appear in the CLI.
Route refresh is sent when you enable BGP dampening.
Related
Commands
● show ip bgp dampened-paths — view the BGP paths.
bgp default local-preference
Change the default local preference value for routes exchanged between internal BGP peers.
Syntax
bgp default local-preference value
To return to the default value, use the no bgp default local-preference command.
Parameters
value Enter a number to assign to routes as the degree of preference for those routes.
When routes are compared, the higher the degree of preference or local preference
value, the more the route is preferred. The range is from 0 to 4294967295. The
default is 100.
Defaults 100
Command Modes ROUTER BGP
Border Gateway Protocol 347