White Papers

ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to clear
information related only to ipv6 unicast routes.
ipv4-address
mask
(OPTIONAL) Enter an IPv4 address in dotted decimal format and the prefix mask in
slash format (/x) to reset only that prefix.
ipv6–address
mask
(OPTIONAL) Enter the IPv6 address followed by the network mask to reset only
that prefix.
filter-list as-
path-name
(OPTIONAL) Enter the keywords filter-list then the name of a configured
AS-PATH list.
regexp regular-
expression
(OPTIONAL) Enter the keyword regexp then regular expressions. Use one or a
combination of the following:
● . = (period) any single character (including a white space).
● * = (asterisk) the sequences in a pattern (0 or more sequences).
● + = (plus) the sequences in a pattern (1 or more sequences).
● ? = (question mark) sequences in a pattern (either 0 or 1 sequences).
NOTE: Enter an escape sequence (CTRL+v) prior to entering the ? regular
expression.
● [ ] = (brackets) a range of single-character patterns.
● ( ) = (parenthesis) groups a series of pattern elements to a single element.
● { } = (braces) minimum and the maximum match count.
● ^ = (caret) the beginning of the input string. If you use the caret at the
beginning of a sequence or range, it matches on everything BUT the characters
specified.
● $ = (dollar sign) the end of the output string.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
If you enter the clear ip bgp flap-statistics command without any parameters, all statistics
are cleared.
360 Border Gateway Protocol