White Papers

system-
description
Enter the keywords system-description to advertise the system description
TLVs to the LLDP peer.
system-name Enter the keywords system-name to advertise the system name TLVs to the
LLDP peer.
Defaults None
Command Modes CONFIGURATION (conf-lldp)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Modified to support management-address parameter.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
The command options management-address,system-capabilities, system-description,
and system-name can be invoked individually or together, in any sequence.
advertise management-tlv (Interface)
Advertise management type, length, values (TLVs) to the specified interface.
Syntax
advertise management-tlv {management-address | system-capabilities |
system-description | system-name}
To remove advertised management TLVs, use the no advertise management-tlv
{management-address | system-capabilities | system-description | system-
name} command.
Parameters
management-
address
Enter the keywords management-address to advertise the management IP
address TLVs to the specified interface.
system-
capabilities
Enter the keywords system-capabilities to advertise the system capabilities
TLVs to the specified interface.
system-
description
Enter the keywords system-description to advertise the system description
TLVs to the specified interface.
system-name Enter the keywords system-name to advertise the system name TLVs to the
specified interface.
Defaults None
Command Modes INTERFACE (conf-interface-lldp)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
900 Link Layer Discovery Protocol (LLDP)