White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

991

992

993

994

995

996

997

998

999

1000

Table Of Contents

Version Description

9.10(0.0) Introduced on the S6100-ON.

9.9(0.0) Introduced on the Z9500.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.

Commands

● ipv6 nd ra-guard enable — configure the RA guard related commands.

● ipv6 nd raguard policy policy-name — define the RA guard policy name and enter the RA guard policy

configuration mode.

other–config–flag

Enable the verification of the advertised other configuration parameter. If this command is not configured, the verification

process is bypassed.

Syntax

other-config-flag {on | off}

To reset the other configuration parameter, use the no other-config-flag {on | off}

command.

Parameters

on Enter the keyword on to set the other-config-flag value as ON.

off Enter the keyword off to set the other-config flag value as OFF.

Defaults None

Command Modes POLICY LIST CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the C9010.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.