White Papers

privilege level Enter the keyword privilege then a number from zero (0) to 15.
role role-name Enter the keyword role followed by the role name to associate with that user ID.
secret Enter the keyword secret then the encryption type.
sha256-password Enter the keyword sha256-password then the encryption-type or the
password.
Defaults The default encryption type for password option is 0. The default encryption type for secret option
is 5. The default encryption type for sha256-password option is 8. The default value of privilege
level is 1.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(1.0) Introduced dynamic-salt option on the S4810 and S4820T.
9.13.0.0 Enhanced to display a warning message when a weak password is used. Introduced
the dynamic-salt option on the MXL, S5000, S4048-ON, S6000, S6000-ON,
S3048-ON, S3100 Series, C9010, S4048T-ON, Z9500, Z9100-ON, S6100-ON,
S6010-ON.
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Added support for the sha256-password option for S3100, S3048–ON, S4048–
ON, S4810, S4820T, S5000, S6000, S6000–ON, Z9100–ON, MXL, and Z9500.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T, S4810, MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for the secret option and the MD5 password encryption.
Extended the name from 25 to 63 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage
Information
To view the defined user names, use the show running-config user command. You can use the
dynamic-salt option only under the secret and the password options.
When you configure the password, the system alerts if your password does not match the following
criteria. The system accepts your password even if these conditions are not met. Dell EMC Networking
recommends selecting a strong password for enhanced security.
● A minimum of eight characters in length
1368 Security