White Papers

Usage
Information
By default, access to commands are determined by the user’s role (if defined) or by the user’s privilege
level. If the aaa authorization role-only command is enabled, then only the user’s role is used.
Before you enable role-based only AAA authorization:
1. Locally define a system administrator user role.This will give you access to login with full permissions
even if network connectivity to remote authentication servers is not available.
2. Configure login authentication on the console. This ensures that all users are properly identified
through authentication no matter the access point
3. Specify an authentication method (RADIUS, TACACS+, or Local).
4. Specify authorization method (RADIUS, TACACS+ or Local).
5. Verify the configuration has been applied to the console or VTY line.
Related
Commands
login authentication, password, radius-server host, tacacs-server host
role
Changes command permissions for roles.
Syntax role mode { { { addrole | deleterole } role-name } | reset } command
To delete access to a command, use the no role mode role-name
Parameters
mode
Enter one of the following keywords as the mode for which you are controlling
access:
configure for CONFIGURATION mode
exec for EXEC mode
interface for INTERFACE modes
line for LINE mode
route-map for Route-map mode
router for Router mode
addrole Enter the keyword addrole to add permission to the command. You cannot add
or delete rights for the sysadmin role.
deleterole
Enter the keyword deleterole to remove access to the command. You cannot add
or delete rights for the sysadmin role.
role-name Enter a text string for the name of the user role up to 63 characters. These are 3
system defined roles you can modify: secadmin, netadmin, and netoperator.
reset Enter the keyword reset to reset all roles back to default for that command.
command Enter the command’s keywords to assign the command to a certain access level.
You can enter one or more keywords.
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
Security 1433