White Papers

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Example
DellEMC#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
DellEMC#
snmp context
Enables you to map a BGP VRF instance within an SNMP context through community mapping in SNMPv2c and SNMPv3.
Syntax
[no] snmp context [context name]
Parameters
context name
Enter a unique name for the context.
Defaults None
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14.1.0 Introduced on S4810 and S4820T.
9.13(0.0) Introduced on all DNOS platforms.
Usage
Information
Use this command to map SNMP context to a VRF instance within a community in SNMPv2c and
SNMPv3. The no version of this command turns off this feature.
1464 Simple Network Management Protocol (SNMP) and Syslog