White Papers

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0)
Added the keywords discard-counters, interface, and the variable
interface on the S4810, S4820T, S5000, S6000, Z9000, Z9500.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
8.2.1.0 Introduced on the C-Series and S-Series.
Example
The following example shows how to clear the discard counters globally:
DellEMC> clear ip dhcp snooping source-address-validation discard-
counters
The following example shows how to clear the discard counters on an interface:
DellEMC> clear ip dhcp snooping source-address-validation discard-
counters interface TenGigE 1/1/1/1
The following example shows how to clear the discard counters on a port channel interface:
DellEMC> clear ip dhcp snooping source-address-validation discard-
counters interface portchannel 1
Related
Commands
● show ip dhcp snooping — display the contents of the DHCP binding table.
clear ipv6 dhcp snooping binding
Clear all the DHCPv6 snooping binding database entries.
Syntax
clear ipv6 dhcp snooping binding
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
550 Dynamic Host Configuration Protocol (DHCP)