API Guide

1.1.1.0/24 0 1 0 00:00:00:00:00:00 CP -
100.1.1.0/24 1 0 20 00:03:00:00:00:02 Po 10 0
100.1.1.0/24 1 0 1000 00:01:00:00:00:02 Gi 3/42 0
0.0.0.0/0 0 1 0 00:00:00:00:00:00 CP -
DellEMC#
Example
(Member-Info)
DellEMC# show ip cam stack-unit 3 po 0 ecmp-group member-info detail
Group Index Member Count Mac-Addr Port VLan ID
-------------------------------------------------------------------------
0 2 00:03:00:00:00:02 Po 10 20
00:01:00:00:00:02 Gi 3/42 1000
DellEMC#
show ip fib stack-unit
View all Forwarding Information Base (FIB) entries of a specific stack-unit.
Syntax
show ip fib stack-unit stack-unit-number vrf vrf-name [ip-address [mask]
[longer-prefixes] | summary]
Parameters
stack-unit-
number
Enter the stack unit ID.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view FIB entries
corresponding to that VRF.
ip-address mask (OPTIONAL) Enter the IP address of the network destination to view only
information on that destination. Enter the IP address in dotted decimal format
(A.B.C.D). Enter the mask in slash prefix format (/X).
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prefix.
summary (OPTIONAL) Enter the keyword summary to view the total number of prefixes in
the FIB.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
IPv4 Routing 745