API Guide

Version Description
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.3.7.0 Introduced on the S4810.
pre-6.2.1.1 Introduced on the E-Series.
Usage
Information
MAC Accounting information can be accessed using SNMP via the Force10 Monitor MIB. For more
information about enabling SNMP, refer to the Dell EMC Networking OS Configuration Guide.
NOTE: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an increasing
order using SNMP. As a workaround, you can use the -C c option in snmpwalk or snmpbulkwalk
to access the Force10 MONITOR MIB. For example: % snmpwalk -C c -v 2c -c public 133.33.33.131
enterprise.6027.3.3.3
Example
Dell-1# show mac accounting destination interface gigabitethernet 2/1
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Gi 11/1 1000 10000 5120000
00:44:00:00:00:01 Gi 11/1 1000 10000 5120000
00:22:00:00:00:00 Gi 11/1 1000 10000 5120000
00:44:00:00:00:02 Gi 11/1 2000 10000 5120000
00:44:00:00:00:01 Gi 11/1 2000 10000 5120000
Dell-1#
Related
Commands
● show mac accounting access-list — display the MAC access list configurations and counters (if
configured).
show mac learning-limit
Display MAC address learning limits set for various interfaces.
Syntax
show mac learning-limit [violate-action] [detail] [interface interface]
Parameters
violate-action (OPTIONAL) Enter the keywords violate-action to display the MAC learning
limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning limit in detail.
interface
interface
(OPTIONAL) Enter the keyword interface with the following keywords and the
interface information:
● For a port channel interface, enter the keywords port-channel then a
number.
● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then
the slot/port information.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Command Modes
● EXEC
● EXEC Privilege
Layer 2 889