CLI Guide

NOTE: It is possible for the switch to store two types of certificates: one for the FIPS mode and
one for the non-FIPS mode. If the system is in FIPS mode, the certificate is installed as the FIPS
certificate. If the system is in non-FIPS mode, the certificate is installed as the non-FIPS certificate.
When FIPS mode is enabled or disabled, the certificates (and keys) are switched by the system.
NOTE: For the switch, there are two possible certificates stored - one for FIPS mode, one for
non-FIPS mode. If the system is in FIPS mode, the certificate will be installed as the FIPS certificate.
If the system is in non-FIPS mode, the certificate will be installed as the non-FIPS certificate. When
FIPS mode is enabled/disabled, the certificates (and keys) are switched by the system.
Related
Commands
● crypto ca-cert install
crypto x509 ocsp
Configures the OCSP behavior.
Syntax
crypto x509 ocsp [nonce] [sign-requests]
Parameters
nonce Enter the keyword nonce to use the nonce feature for the OCSP requests to
OCSP responder communication. This is a one-time value that must be returned
in the OCSP response. If the OCSP responder is using precomputed responses,
then it does not reply with the nonce. The nonce feature is off by default. The no
version of the command disables the nonce feature.
sign-requests Enter the keyword sign-requests to sign the OCSP requests to OCSP
responder communication with the system’s own certificate so that the OCSP
responder may verify the requestor. The sign-requests feature is off by default.
The no version of the command disables signing of requests.
Defaults NA.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command:
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.11.0.0 Introduced the command.
Usage
Information
The following RBAC roles are allowed to issue this command:
● sysadmin
● secadmin
Related
Commands
● crypto ca-cert install
● crypto cert generate
● crypto cert install
crypto x509 revocation
Configure the revocation check behavior for the certificate.
Syntax
crypto x509 revocation ocsp {accept | reject}
1716 X.509v3