CLI Guide

Defaults normal
Command Modes CONFIGURATION-INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage
Information
Fixed registration prevents an interface, configured using the command line, to belong to a VLAN (static
configuration) from being unconfigured when it receives a Leave message. Therefore, Registration mode
on that interface is fixed.
Normal registration is the default registration. The port’s membership in the VLAN depends on GVRP. The
interface becomes a member of a VLAN after learning about the VLAN through GVRP. If the VLAN is
removed from the port that sends GVRP advertisements to this device, the port stops being a member of
the VLAN.
To advertise or learn about VLANs through GVRP, use the forbidden command when you do not want
the interface.
Related
Commands
● show gvrp — display the GVRP configuration including the registration.
protocol gvrp
Access GVRP protocol — (config-gvrp)#.
Syntax
protocol gvrp
Defaults Disabled.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
622 GARP VLAN Registration (GVRP)