Concept Guide

15775404032 15775399936 FAT32 USBFLASH rw usbflash:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
You can change the default file system so that file management commands apply to a particular device or memory.
To change the default directory, use the following command.
● Change the default directory.
EXEC Privilege mode
cd directory
Copy Files to and from the System
The command syntax for copying files is similar to UNIX. The copy command uses the format copy source-file-url
destination-file-url.
NOTE: For a detailed description of the copy command, refer to the Dell Networking OS Command Reference.
● To copy a local file to a remote system, combine the file-origin syntax for a local file location with the file-destination syntax
for a remote file location.
● To copy a remote file to Dell Networking system, combine the file-origin syntax for a remote file location with the file-
destination syntax for a local file location.
Table 5. Forming a
copy Command
Location source-file-url Syntax destination-file-url Syntax
For a remote file location:
FTP server
copy ftp://
username:password@{hostip |
hostname}/filepath/filename
ftp://
username:password@{hostip |
hostname}/ filepath/filename
For a remote file location:
TFTP server
copy tftp://{hostip |
hostname}/filepath/ filename
tftp://{hostip | hostname}/
filepath/filename
For a remote file location:
SCP server
copy scp://{hostip |
hostname}/filepath/ filename
scp://{hostip | hostname}/
filepath/filename
Important Points to Remember
● You may not copy a file from one remote system to another.
● You may not copy a file from one location to the same location.
● When copying to a server, you can only use a hostname if a domain name server (DNS) server is configured.
●
The usbflash command is supported on the device. Refer to your system’s Release Notes for a list of approved USB
vendors.
Example of Copying a File to an FTP Server
Dell#copy flash://Dell-EF-8.2.1.0.bin ftp://myusername:mypassword@10.10.10.10/
/Dell/Dell-EF-8.2.1.0
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
27952672 bytes successfully copied
Example of Importing a File to the Local System
core1#$//copy ftp://myusername:mypassword@10.10.10.10//Dell/
Dell-EF-8.2.1.0.bin flash://
Destination file name [Dell-EF-8.2.1.0.bin.bin]:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
26292881 bytes successfully copied
Getting Started
49