Deployment Guide

1 drwx 4096 Jan 01 1980 00:00:00 +00:00 .
2 drwx 1536 Jun 23 2015 06:07:25 +00:00 ..
3 drwx 4096 Jun 01 2015 19:37:48 +00:00 TRACE_LOG_DIR
4 drwx 4096 Jun 01 2015 19:37:52 +00:00 CONFD_LOG_DIR
5 drwx 8192 Jun 01 2015 19:37:52 +00:00 CORE_DUMP_DIR
6 d--- 4096 Jun 01 2015 19:37:56 +00:00 ADMIN_DIR
7 drwx 4096 Jun 01 2015 19:38:00 +00:00 RUNTIME_PATCH_DIR
8 -rwx 19705 Jun 08 2015 23:41:44 +00:00
Diag_Test_Report_SU_1.txt
flash: 100450304 bytes total (99524608 bytes free)
Related
Commands
cd – changes the working directory.
format flash
Erase all existing files and reformat the file system in the internal flash memory or the USB drive. After the file system is
formatted, files cannot be restored.
C9000 Series
Syntax
format {flash: | usbflash:}
From a PE console, use format {flash:filename/path | usbflash: filename/path }
Parameters
flash: | usbflash:
● flash: reformat the file system in the internal flash memory.
● usbflash: reformat the file system in the USB flash drive.
Defaults flash memory
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
Usage
Information
Include the colon (:) when entering this command.
CAUTION: This command deletes all files, including the startup configuration file. So, after
executing this command, consider saving the running config as the startup config (use the
write memory command or copy run start command).
You can also use the format command from the port extender (PE) console to erase all files from the
flash or USB flash.
172 File Management