Deployment Guide

show os-version
Display the release and software image version information of the image file specified.
C9000 Series
Syntax
show os-version [file-url]
From a PE console, use show os-version to view the release and software image information.
Parameters
file-url (OPTIONAL) Enter the following location keywords and information:
● For a file on the internal flash, enter flash:// then the filename.
● For a file on an FTP server, enter ftp://user:password@hostip/
filepath.
● For a file on an NFS-mounted system, enter nfsmount://<mount-point/
filepath>
NOTE: While switching to a remote NFS file system, it is mandatory to
specify the mount-point that indicates the working directory on the NFS
file system. You cannot enter the root directory of the remote NFS file
system.
●
For a file on a TFTP server, enter tftp://hostip/filepath.
● For a file on the USB port, enter usbflash://filepath.
NOTE: The port extender information is displayed only when the extended
bridge feature is enabled.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
NOTE: A filepath that contains a dot ( . ) is not supported.
Example
Dell#show os-version
RELEASE IMAGE INFORMATION :
---------------------------------------------------------------------
Platform Version Size ReleaseTime
C-Series:C9000 9.9(0.0) 125192571 Sep 8 2015 06:08:13
TARGET IMAGE INFORMATION :
---------------------------------------------------------------------
182 File Management