Deployment Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

361

362

363

364

365

366

367

368

369

370

Table Of Contents

both Enter the keyword both to indicate that the system sends and accepts multiple

paths from peers.

path-count

Enter the number paths supported. The range is from 2 to 64.

Defaults none

Command Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Inroduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.8.0 Introduced on the S4810.

Commands

bgp add-path — allows the advertisement of multiple paths for the same address prefix without the new

paths implicitly replacing any previous ones.

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.

C9000 Series

Syntax

neighbor {ip-address | peer-group-name} advertisement-interval seconds

To return to the default value, use the no neighbor {ip-address | peer-group-name}

advertisement-interval command.

Parameters

ip-address

(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.

peer-group-name

Enter the name of the peer group to set the advertisement interval for all routers in

the peer group.

seconds

Enter a number as the time interval, in seconds, between BGP advertisements. The

range is from 0 to 600 seconds. The default is 5 seconds for internal BGP peers

and 30 seconds for external BGP peers.

Defaults

● seconds = 5 seconds (internal peers)

● seconds = 30 seconds (external peers)

Command Modes ROUTER BGP