Deployment Guide

● cpu data-plane: Displays data-plane statistics, including the HiGig port
statistics with input/output counters to which the stacking module is
connected.
● cpu i2c: Displays active i2c-interface statistics.
● cpu management: Displays management port counters.
● cpu sata-interface: Displays sata-interface error counter-statistics.
cp-switch Enter the keyword cp-switch with a command option to display hardware
statistics for control-plane and protocol control traffic. The command options are:
● counters: Displays the counters for control-plane and protocol control
packets to troubleshoot an error condition.
● details: Displays more detailed information on control-plane and protocol
control packet statistics.
● drops: Displays the number of internal drops of control-plane and protocol
control packets.
● port-stats: Displays status about why a control-plane internal port is not
brought up to register level. You can use the detail option to display the
port-statistics in details.
● register: Displays internal control-plane registers.
● table-dump: Displays the tables from the bShell.
forwarding-table
mode
Enter the keyword forwarding—table mode to display the statistics related to
forwarding table.
linecard slot-id Enter the linecard slot-id parameters with a command option to display
hardware statistics from the specified line-card ports. The range of line-card slot
IDs is from 0 to 2. The command options are:
● buffer total-buffer: Displays the total number of buffers allocated for a
specified line card.
● buffer unit unit-num port statistics: Displays the number of
buffers allocated for a specified NPU. The range of port-pipe unit numbers is
0–3.
● buffer unit unit-num total-buffer : Displays the number of buffers
allocated for a specified NPU. The range of NPU numbers is 0–3.
● cpu data-plane statistics: Displays data-plane statistics, including the
HiGig port statistics with input/output counters to which the stacking module is
connected.
● cpu i2c statistics: Displays active i2c-address statistics.
● cpu management statistics: Displays management port counters for a
specified line card.
● cpu sata-interface statistics: Displays sata-interface error counter-
statistics.
● drops unit unit-num {port {port-num | range}: Displays the
number of dropped packets on the ports of a specified line-card.
● user-port {user-port-num | port-range}: Displays statistics on a
specified line-card port or range of ports.
● unit unit-num {counters | details | ipmc-replication |
port-stats | register | table-dump}: Displays statistics on a
specified NPU. The command options are:
○ counters: Displays the traffic counters.
○ details: Displays more detailed hardware information.
○ ipmc-replication: Displays the multicast IPMC replication table from
the bShell.
○ port-stats: Displays the internal statistics on a per-port basis.
○ register: Displays the line-card internal registers.
○ table-dump: Displays the tables from the bShell.
● bp-link-map: Displays the backplane links (between leaf/port and spine/
fabric) on a specified line card.
Debugging and Diagnostics
591