Users Guide

CONFIGURATION mode
router rip
● Apply a configured prefix list to incoming routes. You can specify an interface.
If you enter the name of a nonexistent prefix list, all routes are forwarded.
CONFIG-ROUTER-RIP mode
distribute-list prefix-list-name in [interface]
● Apply a configured prefix list to outgoing routes. You can specify an interface or type of route.
If you enter the name of a non-existent prefix list, all routes are forwarded.
CONFIG-ROUTER-RIP mode
distribute-list prefix-list-name out [interface | connected | static | ospf]
To view the configuration, use the show config command in ROUTER RIP mode, or the show running-config rip
command in EXEC mode.
DellEMC(conf-router_rip)#show config
!
router rip
distribute-list prefix juba out
network 10.0.0.0
DellEMC(conf-router_rip)#router ospf 34
Applying a Filter to a Prefix List (OSPF)
To apply a filter to routes in open shortest path first (OSPF), use the following commands.
● Enter OSPF mode.
CONFIGURATION mode
router ospf
● Apply a configured prefix list to incoming routes. You can specify an interface.
If you enter the name of a non-existent prefix list, all routes are forwarded.
CONFIG-ROUTER-OSPF mode
distribute-list prefix-list-name in [interface]
● Apply a configured prefix list to incoming routes. You can specify which type of routes are affected.
If you enter the name of a non-existent prefix list, all routes are forwarded.
CONFIG-ROUTER-OSPF mode
distribute-list prefix-list-name out [connected | rip | static]
To view the configuration, use the show config command in ROUTER OSPF mode, or the show running-config ospf
command in EXEC mode.
DellEMC(conf-router_ospf)#show config
!
router ospf 34
network 10.2.1.1 255.255.255.255 area 0.0.0.1
distribute-list prefix awe in
DellEMC(conf-router_ospf)#
ACL Remarks
While defining ACL rules, you can optionally include a remark to make the ACLs more descriptive. You can include a remark with
a maximum of 80 characters in length.
The remark command is available in each ACL mode. You can configure up to 4294967291 remarks for a given IP ACL and
65536 remarks for a given MAC ACL.
You can include a remark with or without a remark number. If you do not enter a remark number, the remark inherits the
sequence number of the last ACL rule. If there is no ACL rule when you enter a remark, the remark takes sequence number 5. If
126
Access Control Lists (ACLs)