Users Guide

NOTE: Note that the methods were not applied to the console so the default methods (if configured) are applied there.
!
line console 0
exec-timeout 0 0
line vty 0
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
line vty 1
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
line vty 2
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
line vty 3
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
line vty 4
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
line vty 5
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
line vty 6
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
line vty 7
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
line vty 8
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
line vty 9
login authentication ucraaa
authorization exec ucraaa
accounting commands role netadmin ucraaa
!
Configuring TACACS+ and RADIUS VSA Attributes for RBAC
For RBAC and privilege levels, the Dell EMC Networking OS RADIUS and TACACS+ implementation supports two vendor-
specific options: privilege level and roles. The Dell EMC Networking vendor-ID is 6027 and the supported option has attribute of
type string, which is titled “Force10-avpair”. The value is a string in the following format:
protocol : attribute sep value
“attribute” and “value” are an attribute-value (AV) pair defined in the Dell EMC Networking OS TACACS+ specification, and
“sep” is “=”. These attributes allow the full set of features available for TACACS+ authorization and are authorized with the
same attributes for RADIUS.
Example for Configuring a VSA Attribute for a Privilege Level 15
The following example configures an AV pair which allows a user to login from a network access server with a privilege level of
15, to have access to EXEC commands.
The format to create a Dell EMC Networking AV pair for privilege level is shell:priv-lvl=<number> where number is a
value between 0 and 15.
Force10-avpair= ”shell:priv-lvl=15“
Example for Creating a AVP Pair for System Defined or User-Defined Role
838
Security