White Papers

S 6.1.2.9/32 via 6.1.20.2, Te 5/1 1/0 00:02:30
S 6.1.2.10/32 via 6.1.20.2, Te 5/1 1/0 00:02:30
S 6.1.2.11/32 via 6.1.20.2, Te 5/1 1/0 00:02:30
S 6.1.2.12/32 via 6.1.20.2, Te 5/1 1/0 00:02:30
S 6.1.2.13/32 via 6.1.20.2, Te 5/1 1/0 00:02:30
S 6.1.2.14/32 via 6.1.20.2, Te 5/1 1/0 00:02:30
S 6.1.2.15/32 via 6.1.20.2, Te 5/1 1/0 00:02:30
S 6.1.2.16/32 via 6.1.20.2, Te 5/1 1/0 00:02:30
S 6.1.2.17/32 via 6.1.20.2, Te 5/1 1/0 00:02:30
S 11.1.1.0/24 Direct, Nu 0 0/0 00:02:30
Direct, Lo 0
--More--
Dell EMC Networking OS installs a next hop that is on the directly connected subnet of current IP address on the interface.
Dell EMC Networking OS also installs a next hop that is not on the directly connected subnet but which recursively resolves to a
next hop on the interface's configured subnet.
● When the interface goes down, Dell EMC Networking OS withdraws the route.
● When the interface comes up, Dell EMC Networking OS re-installs the route.
● When the recursive resolution is “broken,” Dell EMC Networking OS withdraws the route.
● When the recursive resolution is satisfied, Dell EMC Networking OS re-installs the route.
Adding description for IPv4 and IPv6 static routes
Dell EMC Networking OS provides support to add a description for the IPv4 or IPv6 static route configurations. A name option
is introduced to provide the description about the static route configured. This feature enables you to segregate or distinguish
between the configured IPv4 or IPv6 static routes.
Following is the syntax of the {ip | ipv6} route command with the name option:
{ip | ipv6} route [vrf vrf-name] ip-address mask {ip-address | interface [ip-address]}
[distance] [name description] [permanent] [tag tag-value] [vrf vrf-name] [weight weight-
value]
You can enter up to 32 characters as the name or description for this route. These description can be a combination of numbers,
special characters, and alphabets. To add multiple strings using space, use double quotes.
Following is the sample configuration steps to provide the descriptions for the IPv4 and IPv6 static route configuration:
DellEMC(conf)# ip route 199.1.1.0 /24 vlan 100 name "Uplink To NewYork"
DellEMC(conf)# ipv6 route 1001:1001::/64 GigabitEthernet 1/42 2001:2001::1 name
ipv6_link_going_to_europe_centre
DellEMC(conf)# ip route 19.1.1.0/24 19.1.1.1 name This_link_goes_to_London_Central
To view the description for the IPv4 or IPv6 static routes, use the show running-config static command. Following is
the sample show running-config static output:
DellEMC#show running-config static
!
ipv6 route 1::/32 GigabitEthernet 2/3 11::1 name Stack-2
ipv6 route 2::/32 GigabitEthernet 2/48 11::1 name Stack-2
ip route 2.2.2.0/24 GigabitEthernet 2/47 name Stack-2
ipv6 route 1001:1001::/64 GigabitEthernet 1/42 2001:2001::1 name
ipv6_link_going_to_europe_centre
ip route 19.1.1.0/24 19.1.1.1 name This_link_goes_to_London_Central
ipv6 route 1500:1500::/96 2500:2500::1 name Under-Sea_Links_to_Asia-Pacific
ip route 50.50.1.32/30 Vlan 210 name AZ!#$_Link_to_Asia_$#
ip route 199.1.1.0 /24 vlan 100 name "Uplink To NewYork"
ip route 100.1.1.0/24 Vlan 100 name Any_Description_upto_32_characte
ip route 199.1.1.0/24 GigabitEthernet 1/41 name Added_Description_for_StaticRoute
NOTE:
You can view the description of the configured static routes only using the show running-config static
command.
436 IPv4 Routing