Administrator Guide

Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Added support for the track-id on the S4810, S4820T, S6000, and Z9000.
9.5(0.1) Introduced on the Z9500
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
show cam pbr
Display the PBR CAM content.
C9000 Series
Syntax
show cam pbr {[interface interface] | linecard slot-number port-set
number]} [summary]
Parameters
interface
interface
Enter the keyword interface then the name of the interface.
linecard number Enter the keyword linecard then the slot number. The range is from 0 to 11.
port-set number Enter the keywords port-set then the port-pipe number.
summary Enter the keyword summary to view only the total number of CAM entries.
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
The show cam pbr command displays the PBR CAM content.
Related
Commands
● ip redirect-group – applies a redirect group to an interface.
● show ip redirect-list – displays the redirect-list configuration.
1336 Policy-based Routing (PBR)